Academic Transfer Pathway

 logo

Back to Lee College


The Engineering Technology Bachelor of Science degree program at Sam Houston State University is intended to provide an educational experience in the areas of modern technology, management, and leadership that prepares students to meet challenges in various industries. Students learn to draw upon the principles of physical sciences, basic engineering practice, and technology in industry for the solution of technical problems involving industrial products, services, materials, and processes, as well as the supervision and management of facilities and personnel.​

The program has two emphasis options: electronics and safety management. The emphasis in electronics prepares students for a career as technologist, engineer, and specialist etc. in fields including digital systems, power and energy, analog electronics, micro-controller applications, automation and control, robotics, power electronics, and many other related areas. The emphasis in safety management prepares students for a career as safety specialist in many industrial fields. Students will learn to implement safety procedures for broad industrial fields such as construction, manufacturing, chemical processing, and many others. The program provides students with training and practical experience in areas such as construction management, product design and development, and electronics and computer engineering technology.

There are currently 500 + students enrolled in Engineering Technology at SHSU. Enrollment in the program has grown by over 50% during the past 5 years when the department was restructured from Industrial Technology to Engineering Technology. The B.S. in ECET degree program is one of the fastest growing majors in both the department and the College of Science and Engineering Technology (CoSET) at SHSU.  There are literally hundreds of possible career opportunities for those graduating with a degree from the Engineering Technology program at SHSU.

For additional information regarding admission requirements, degree programs, description of courses, and financial assistance available, please, refer to the appropriate sections of the undergraduate catalog. Brochures and information concerning the department and scholarships may be obtained by calling 936-294-1191, by writing: Sam Houston State University, Department of Engineering Technology, Engineering Technology program, Huntsville, Texas, 77341-2266, or by visiting Department of Engineering Technology.
 

Department Chair: Dr. Faruk Yildiz
Phone and Email: (936) 294-1216 
Location: Fred Pirkle Engineering Technology Center, PIRK 420C

Courses Transfer Students Should Take:* 

SHSU Course NumberCollege/TCCN SHSU Course Title Semester Credit Hours
ETCM 1363ARCH 2312Wood Frame Construction3
ETDD 1361ENGR 1304Engineering Graphics3
ETDD 1366Machining Technology I3
ETEC 1010Engineering Foundations1-2
ETEC 1371ENGR 1304Descriptive Geometry3
ETEE 1340ENGT 1401Introduction to Circuits3
ETEE 2320ENGT 1402Circuits and Systems3
MATH 1314MATH 2312Pre Calculus Algebra3
MATH 1316MATH 1316Plane Trigonometry3
MATH 1420MATH 2413Calculus I4
PHYS 1101PHYS 1101General Physics Laboratory I1
PHYS 1102PHYS 1102General Physics Laboratory II1
PHYS 1301PHYS 1301General Phy-Mechanics & Heat3
PHYS 1302PHYS 1302Gen Phy-Snd,Lght, Elec, & Mag3

*Note: Other courses may transfer, depending upon the selected degree or program.  For a complete listing of degree-specific requirements, please, review the degree plan within the Undergraduate Catalog

Field of Study

Sam Houston State University supports the State of Texas Fields of Study

The Core Curriculum at Sam Houston State University (to be used by all incoming students as of fall 2014) contains 42 semester credit hours, encompassing nine component areas. Each component area has a minimum credit hour requirement and a selection of specific courses that may be used to satisfy the requirement. The Core Curriculum details Sam Houston State University courses and their Texas Common Course Number (TCCN) equivalents for college transfer students which comprise SHSU’s core curriculum.

Many SHSU disciplines including the sciences, business, and education require specific courses from the SHSU core as degree specific graduation requirements. To minimize cost and time to complete degree requirements always select SHSU/transfer core courses specified as degree requirements in your intended major. If you have not decided on a major, select core courses supporting your intended area of academic concentration.

Prior to enrolling in core classes, students are encouraged to review specific degree requirements for their major. Selection of major-specified core courses reduces the total number of hours required for graduation.

If you do not see a Texas Common Course Number (TCCN) mapping a specific core course to your transfer institution, please go to Transfer Course Equivalency Guide and select your institution from the drop-down menu. The result will list all currently mapped transfer courses from your institution to SHSU courses.