The Engineering Technology Bachelor of Science degree program at Sam Houston State University is intended to provide an educational experience in the areas of modern technology, management, and leadership that prepares students to meet challenges in various industries. Students learn to draw upon the principles of physical sciences, basic engineering practice, and technology in industry for the solution of technical problems involving industrial products, services, materials, and processes, as well as the supervision and management of facilities and personnel.
The program has two emphasis options: electronics and safety management. The emphasis in electronics prepares students for a career as technologist, engineer, and specialist etc. in fields including digital systems, power and energy, analog electronics, micro-controller applications, automation and control, robotics, power electronics, and many other related areas. The emphasis in safety management prepares students for a career as safety specialist in many industrial fields. Students will learn to implement safety procedures for broad industrial fields such as construction, manufacturing, chemical processing, and many others. The program provides students with training and practical experience in areas such as construction management, product design and development, and electronics and computer engineering technology.
The Department of Engineering Technology also offers a B.S. in Engineering Technology, a B.S. in Construction Management, a B.S. Mechanical Engineering Technology, and a B.S. in Engineering Design Technology. Additionally, minors and concentrations are available in Electronics, Industrial Safety Management, Construction Management, Engineering Design Technology, Manufacturing Engineering Technology, Architectural Design Technology, and Trades & Industry Certification.
There are currently 500 + students enrolled in Engineering Technology at SHSU. Enrollment in the program has grown by over 50% during the past 5 years when the department was restructured from Industrial Technology to Engineering Technology. The B.S. in Electronic and Computer Engineering Technology degree program is one of the fastest growing majors in both the department and the College of Science and Engineering Technology (COSET) at SHSU. There are literally hundreds of possible career opportunities for those graduating with a degree from the Engineering Technology program at SHSU.
For additional information regarding admission requirements, degree programs, description of courses, and financial assistance available, please, refer to the appropriate sections of the undergraduate catalog. Brochures and information concerning the department and scholarships may be obtained by calling 936-294-1191, by writing: Sam Houston State University, Department of Engineering Technology, Engineering Technology program, Huntsville, Texas, 77341-2266, or by visiting Department of Engineering Technology.
Department Chair: Dr. Faruk Yildiz
Phone and Email: (936) 294-1216
Location: Fred Pirkle Engineering Technology Center, PIRK 420C
Courses Transfer Students Should Take:*
|SHSU Course Number||College/TCCN||SHSU Course Title||Semester Credit Hours|
|ETCM 1363||ARCH 2312||Wood Frame Construction||3|
|ETDD 1361||ENGR 1304||Engineering Graphics||3|
|ETDD 1366||Machining Technology I||3|
|ETEC 1010||Engineering Foundations||1-2|
|ETEC 1371||ENGR 1304||Descriptive Geometry||3|
|ETEE 1340||ENGT 1401||Introduction to Circuits||3|
|ETEE 2320||ENGT 1402||Circuits and Systems||3|
|MATH 1314||MATH 2312||Pre Calculus Algebra||3|
|MATH 1316||MATH 1316||Plane Trigonometry||3|
|MATH 1420||MATH 2413||Calculus I||4|
|PHYS 1101||PHYS 1101||General Physics Laboratory I||1|
|PHYS 1102||PHYS 1102||General Physics Laboratory II||1|
|PHYS 1301||PHYS 1301||General Phy-Mechanics & Heat||3|
|PHYS 1302||PHYS 1302||Gen Phy-Snd,Lght, Elec, & Mag||3|
*Note: Other courses may transfer, depending upon the selected degree or program. Meet with your academic advisor to confirm whether coursework will transfer from another institution. For a complete listing of degree-specific requirements, please, review the degree plan within the Undergraduate Catalog.
- Bachelor of Science, Major in Construction Management
- Bachelor of Science, Major in Electronics and Computer Engineering Technology
- Bachelor of Science, Major in Engineering Design Technology
- Bachelor of Science, Major in Engineering Technology - Concentration in Electronics
- Bachelor of Science, Major in Engineering Technology - Concentration in Safety Management
- Bachelor of Science, Major in Engineering Technology
- Bachelor of Science, Major in Mechanical Engineering Technology
- Minor in Architectural Design Technology
- Minor in Construction Management
- Minor in Electronics
- Minor in Engineering Design Technology
- Minor in Industrial Safety Management
- Minor in Interior Design
- Minor in Trades and Industry Certification
Field of Study
Sam Houston State University supports the State of Texas Fields of Study.
The Core Curriculum at Sam Houston State University (to be used by all incoming students as of fall 2014) contains 42 semester credit hours, encompassing nine component areas. Each component area has a minimum credit hour requirement and a selection of specific courses that may be used to satisfy the requirement. The Core Curriculum details Sam Houston State University courses and their Texas Common Course Number (TCCN) equivalents for college transfer students which comprise SHSU’s core curriculum.
Many SHSU disciplines including the sciences, business, and education require specific courses from the SHSU core as degree specific graduation requirements. To minimize cost and time to complete degree requirements always select SHSU/transfer core courses specified as degree requirements in your intended major. If you have not decided on a major, select core courses supporting your intended area of academic concentration.
Prior to enrolling in core classes, students are encouraged to review specific degree requirements for their major. Selection of major-specified core courses reduces the total number of hours required for graduation.
If you do not see a Texas Common Course Number (TCCN) mapping a specific core course to your transfer institution, please go to Transfer Course Equivalency Guide and select your institution from the drop-down menu. The result will list all currently mapped transfer courses from your institution to SHSU courses.